|
|
|
|
Westley Engineering Pressings Gallery |
|
|
GALLERY
Westley Engineering’s presswork includes multi-stage progression work, secondary operation presswork including riveting, studding, tapping, drilling, robotic welding and assembly work. This gallery shows a selection of components produced in our press shop for a wide range of industries.
You can view many examples of Westley Engineerings presswork below in the following catagories.
Automotive
Electronics
Bandoliered Components
Building and Air-conditioning
Miscellaneous
To view this gallery on the Westley Engineering web site, www.westleyengineering.co.uk
follow the link below and click on Pressings Gallery.
Westley Engineering Precision Pressings and Tooling |
|
Electronics Product Presswork |
|
|
|
Bussbar components produced
to extremely tight tolerances
on a multi-stage progression tool.
In the flat and/or formed condition.
|
 |
 |
Double-Gang Connector,
produced on multi-stage progression tool, using strip width material. |
|
An electrical component produced out
of Copper, showing 'Crowning' on the
left hand edge of the component
and still maintaining the flatness
to the component, in spite of
the proximity and sizes of the three holes, relatively to the edge of the components. |
 |
 |
A large Galvanised Mild Steel Bracket,
with a number of extremely accurate bends, together with strengthen ribs and shape,
to add strength to the component
and save on cost of materials. |
|
A couple of medium sized
pressed components.
(Top right) Produced from a
Compound Piece and Blank Tool.
(Bottom left) Produced from a
multi-stage Progression Tool. |
 |
 |
An extremely accurate miniature
Lead frame, produced from a
multi-stage progression tool
in very large quantities. |
|
A selection of miniature pressed components, produced from
Tungsten carbide Progression tools,
in extreme high volumes.
|
 |
 |
An extremely accurate spring connector produced from Stainless Steel.
The end nearest the hole, has been
formed back onto it's self twice,
(to give added strength to the component). Component is produced in its
finished condition, from
a multi-stage progression tool. |
|
All three components are produced simultaneously on the same tool,
out of coil Brass,
only 2mm wider than
the largest component. |
 |
To view this gallery on the Westley Engineering web site, www.westleyengineering.co.uk
follow the link below and click on Pressings Gallery.
Westley Engineering Precision Pressings and Tooling |
 |
Three separate 2mm thick Stainless Steel components, when assembled together, are the main components in a Heavy Duty, Ratchet type, Strapping retainer, for the trucking industry. |
|
An accurate pressed cover,
produced out of Mild Steel.
In order to save cost on material thickness, a number of strengthen ribs,
have been added to the component.
|
 |
 |
A large component produced from a number of secondary operation tools.
Material: 1.6mm thick, once pressed out,
it is then over moulded
and supplied to the Automotive industry |
|
A large component produced from a number of secondary operation tools,
due to the low volumes required.
Material: 0.8mm thick, Mild Steel,
which is then Zinc plated
and is part of a Brake Adjuster for trucks. |
 |
 |
A medium sized Bracket, produced from
a Multi-stage Progression tool.
Material: is 1mm thick Mild Steel,
which is then Zinc plated. |
|
A small sized Bracket, produced from a Multi-stage Progression tool. Material: is 0.8mm thick Mild Steel, which is then paint coated. |
 |
To view this gallery on the Westley Engineering web site, www.westleyengineering.co.uk
follow the link below and click on Pressings Gallery.
Westley Engineering Precision Pressings and Tooling |
|
Bandoliered Pressed Products |
|
|
|
A selection of extremely accurate and
small progressions in a variety of
different non-ferrous materials.
Supplied in bandoilered form. |
 |
|
A selection of medium sized and
small sized components
produced in bandoilered form
made out of stainless steel. |
|
Miniature Bandoliered connectors
Material: Non-ferrous - Copper/Bronze. Supplied on reels,
in quantities of millions per annum.
|
 |
 |
Male & Female Bandoliered connectors Material: Non-ferrous - Brass/Copper/Bronze.
Supplied on reels, in quantities of thousands or/and millions. |
|
A selection of Male and Female Bandoilered connectors.
Material: Non ferrous plain and
pre-plated strip - Brass/Copper/Bronze. Supplied on reels, in quantities of thousands or/and millions to many industries, including Automotive and Electronic. |
 |
 |
A miniature connector,
produced in bandoilered form
to very tight tolerances
and supplied to the Electronics industry
in very large volumes. |
To view this gallery on the Westley Engineering web site, www.westleyengineering.co.uk
follow the link below and click on Pressings Gallery.
Westley Engineering Precision Pressings and Tooling |
|
Building & air conditioning presswork |
|
|
|
Galvanised Steel Nail Plates.
Produced in a variety of lengths
and widths for the Building trade.
|
 |
 |
A selection of grip lock Assembled components.
Materials: Mild Steel - post plated,
Zinc and yellow passivated.
Supplied fully assembled to the
Air conditioning industry. |
|
Joist Hangers.
Material: Mild Steel - post plated,
Zinc and yellow passivated.
Supplied to the building trade. |
 |
 |
14 different sizes of male and female Insulclamps. Material: Mild Steel -
post plated, Zinc and yellow passivated. Supplied in sets of males (stud assembled) and females (no studs), for the Air conditioning industry. |
|
A variety of different sizes of
Pipe Hangers. Material: Mild Steel -
post plated, Zinc and yellow passivated. Supplied fully assembled, for the
Air Conditioning industry. |
 |
 |
Different sizes of Strut Plates produced from Galvanised Mild Steel and used
in the Building and Caravan trade
(100% utilisation of material). |
|
Stainless Steel Wall Ties produced
from a Multi-stage Progression Tool. Supplied to the Building trade. |
 |
To view this gallery on the Westley Engineering web site, www.westleyengineering.co.uk
follow the link below and click on Pressings Gallery.
Westley Engineering Precision Pressings and Tooling |
|
Some Multi-Stage Progression Pressings |
|
|
|
A selection of progressions produced
from multi-stage progression tools,
in a variety of different materials
(ferrous and non-ferrous). |
 |
 |
A selection of finished components
and progressions, produced
from multi-stage progression tools
with a very mixed variety
of different material thickness. |
|
A selection of progressions produced
from multi-stage progression tools,
in a variety of different materials
(ferrous and non-ferrous). |
 |
 |
A selection of medium and small sized progressions, produced from
multi-stage progression tools,
for a variety of industries. |
To view this gallery on the Westley Engineering web site, www.westleyengineering.co.uk
follow the link below and click on Pressings Gallery.
Westley Engineering Precision Pressings and Tooling
|
|
|
|